The Cobra Board is a buttress device that can prevent arm drift during left radial artery procedures. This device accommodates a wide range of anatomies due to the flexible 12 inch gooseneck design. The gooseneck is also high tensile to prevent the instrumented arm from drifting away from the operator during catheterization procedures. The carbon fiber base plate fits between the procedural table and mattress, and the cuff is positioned behind the patient’s tricep, for optimal patient comfort and enhanced operating ergonomics.

The TZ Medical ROC Band is a mechanical radial compression device designed to preserve the patency of the radial artery during hemostasis. The device utilizes an adjustable screw cap connected to a mechanical screw thread to control the amount of pressure over the puncture site and the radial artery without using a syringe.

The TZ Medical Flat Radial Board is a lightweight carbon fiber board specifically shaped to allow convenient radial access in conjunction with medical imaging and patient comfort. By combining radial access and a landing zone for equipment, the Flat Radial Board takes radial access to a whole new level.

The Radial Runway provides a radiolucent platform that keeps the patient's wrist in a deflected position for ideal radial access. Disposable straps allow the wrist to be positioned in multiple neutral or extended angles optimizing patient comfort and physician preference. The foam pad and straps remain with the patient post-procedure, acting as an immobilizer for the patient’s wrist during recovery.

The TZ Medical Secure Radial Board is designed to secure and orientate the patient's right or left arm during vascular procedures. The arm board and straps eliminate unwanted movement yielding a consistent image for the physician when performing vascular access.

The flexible plastic Comfort Band provides reliable hemostasis for radial/brachial or dialysis access sites and eliminates the need for manual pressure following needle or sheath removal. The Comfort Band is suitable for use in cardiac cath labs, radiology, and dialysis departments for radial, brachial, and hemodialysis procedures.

The TZ Medical Neptune Pad is a natural product derived from sustainably harvested seaweed that utilizes calcium ions to facilitate hemostasis. These ions are activated by the introduction of blood to the Neptune pad and help to naturally speed up clot formation at the puncture site.

The TZ Medical EZ Hold is a manual-assist compression device that was developed to aid the clinician in manual femoral pressure. The ergonomic design of the EZ Hold permits the clinician to hold pressure comfortably with one hand while palpating the pulse with the other.

TZ Medical's Femoral Pressure Discs can be used as a hemostasis device with our EZ Hold product. Our discs help to apply firm and even pressure on the access point to ensure hemostasis is achieved safely and effectively. Our discs come in a variety of shapes and sizes to accommodate all technician preferences and patient body types.

The TZ Medical Pannus Retention System PRS-02 is used to safely and effectively move and retain excess tissue, allowing easy access on the patient, including groin and left side radial access. The Pannus Retention System uses adhesive pads and straps that can be easily removed and adjusted after application. It is designed to maintain patient comfort while allowing easy patient positioning from any angle.

The TZ Medical Pannus Retention System PRS-02 is used to safely and effectively move and retain excess tissue, allowing easy access on the patient, including groin and left side radial access. The Pannus Retention System uses adhesive pads and straps that can be easily removed and adjusted after application. It is designed to maintain patient comfort while allowing easy patient positioning from any angle.

The PRS™ Lumbar and Cervical Spine Retention System is designed for maintaining maximum sheer loads while supporting, retaining, and/or moving large masses of tissue. It also allows for easy patient positioning during various medical procedures, including lumbar spine and deflecting the shoulders during cervical spine procedures. Load dispersed over a large surface area, accompanied by a latex-free, hypoallergenic adhesive backing provides for a friendly alternative to tapes and adhesives.

The Cranial Immobilization System (PRS-03) is a safe and effective solution for immobilizing the patient’s head during imaging and various surgical procedures. This unique system is designed with micro hook and loop technology and is entirely adjustable to ensure optimal support and comfort for your patients.

The TZ Medical Comfort Cradle is a versatile product that aids both the patient and the operator during procedures. The cradle’s extended width improves comfort, making long procedures more tolerable for the patient. The dimensions of the cradle support and protect the arm, and allow the physician’s hands to be unobstructed during PPM implants, making the patient more accessible.

The TZ Medical Comfort Halo is designed to enhance safety and comfort for patients undergoing conscious sedation. When used in conjunction with a drape, the Comfort Halo also enables physicians to intubate patients while better shielding themselves from any aerosolized particles that could be released from the patient's airway during intubation.

The TZ Medical Patient Immobilizer is a safety device that allows the patient to be secured during imaging procedures. It may enhance these procedures by restricting patient movement and eliminating motion artifact. Less motion eliminates the need for repeat subtraction runs, reducing patient and staff exposure to unnecessary radiation.

The TZ Medical Sidewinder Board is a simple solution that improves patient safety and comfort by effectively positioning the anesthesia drape away from the patient's face while undergoing conscious sedation. Designed with a sturdy carbon fiber base and a flexible gooseneck, the Sidewinder Board slides underneath the table mattress on either side of the patient and is easily adjustable during any procedure. The malleable steel and vinyl gooseneck can be molded into unlimited draping positions, enhancing visualization and patient satisfaction.

TZ Medical SoftGels provide superior cushioning and positioning during surgical procedures. Use our SoftGels to ensure optimal exposure to surgical sites, correct airway management, and provide physiological safety for the patient.

The TZ Medical AccuFlate is a 20ml disposable device designed to accurately control and monitor pressure during inflation and deflation of dilation balloon catheters. Our patented technology allows the Inflation Device to generate pressure up to 30 atm with accuracy of ±1 atm.

The Control Mechanical Thrombectomy Aspirator combines simplicity with maximum pressure to provide optimal control during thrombectomy procedures. Designed with dual valve technology, vacuum pressure is easily controlled by squeezing and releasing the handle, allowing for continuous force while preventing re-injection of the aspirant. The closed fluid system drains the aspirant directly into the 250 ml collection bag when releasing the handle, providing successful thrombectomy with a fraction of the blood loss compared to pump based systems. Instantly start, stop, increase, decrease, and maintain pulse force with a simple to use system that is easily accessible on the procedure table.

The TZ Medical Shoot 'N See is a flexible medical grade tape for use during any vascular procedure involving radiography or fluoroscopy. Applied to the skin or drape before the procedure, the radiopaque markings are visible both to the eye and under fluoroscopy, which allows for quick cross-referencing between the inside and outside of a patient's body.

The TZ Medical SPINR is a manually adjustable, high-performance guidewire controller that provides enhanced rotational speed and control when navigating through the coronary and peripheral vasculature. The ergonomic squeeze and release handle increases rotational speed from 0 to 2,500RPM, while maintaining responsive tactile feedback. Compatible with 0.014” - 0.038” guidewires, the SPINR delivers improved torque and overall performance with predictable clockwise and counterclockwise control, reducing the need to exchange multiple wires during vasculature intervention.

The Control Thrombectomy Filter is a universal system that is compatible with multiple mechanical thrombectomy devices and provides instant visualization of extracted thrombus without having to leave the sterile field. The transparent housing of the filter is designed with anti-fog material to allow for clear and immediate observation of collected thrombus.

The TZ Medical Push-Click Y Connector is designed to provide rapid single-handed manipulation of the valve with a simple push-and-click action. When the mechanism is compressed, the release lever holds the valve in an “open” position, allowing for free movement of wires and catheters. Press the release lever to simply and rapidly close the valve. The Push-Click Y Connector kit includes a Wire Introducer and Torque device.

The Trident™ Nano line of monitors is designed to capture clear and comprehensive ECG tracings during Holter and Extended Holter studies. With multiple wear options, 8G of internal storage, and a low-profile design, the Trident™ Nano offers a unique combination of minimal body burden with the superior diagnostic yield of a 3-channel recording for study durations up to 30 days.

The Trident™ Nano line of body-worn cardiac monitors is fully equipped with state-of-the-art accessories that are designed to improve work flow and increase the quality of short/long term monitoring studies.

Trident™ Pro monitors are equipped with a large LCD touch screen and on-board patient diary that provides a user-friendly experience for manually recorded patient events. Three channels of ECG data are acquired from surface electrodes adhered to the body, and 8G of internal memory with advanced detection algorithm offer a versatile solution to capture, store, and transmit every beat during Holter, Extended Holter, Event, and Mobile Cardiac Telemetry studies for up to 30 days.

The Trident™ Pro line of cardiac monitors is fully equipped with state-of-the-art accessories that are designed to improve work flow and increase the quality of short/long term monitoring studies.

The TZ Medical Pannus Retention System (CZ-PRS-04) is used to safely and effectively move and retain excess tissue. The PRS-04 consists of 4 adhesive pads and 2 adjustable straps (anchor points and connectors) that can be easily repositioned after application. The PRS-04 is packaged sterile, designed for high-BMI c-sections, and is also ideal for surgical applications.

The Panni^® XL Retractor is a sterile pannus management system designed to retract and reposition excess tissue away from the incision site during and after C-section procedures. The Panni XL can be quickly applied by one person and is completely adjustable to ensure optimal patient comfort. It is shower-compatible and can be worn for up to 3 days postpartum to assist with wound health. 

TZ Medical Defibrillation Electrodes are constructed to adhere and conform to the patient’s body, providing superior current distribution, which results in better clinical outcomes. Our multi-function electrodes are designed for EP and Cath Labs, Cardiac Surgery, Critical-Care Areas and other related departments. They are designed for defibrillation, synchronized cardioversion, external pacing and ECG monitoring. Compatible with biphasic and monophasic defibrillators, our electrodes offer direct connections to a variety of defibrillators, such as Zoll, Medtronic QUICK-COMBO, and Philips. We also offer adapters, allowing multiple brands of defibrillators to use the same electrodes.

TZ Medical’s Pediatric Defibrillation Electrodes boast the same clinical benefits as our adult pads, however, are designed for your adolescent patients. Our Pediatric Defibrillation Electrodes are constructed to adhere and conform to the patient’s body, providing superior current distribution, which results in better clinical outcomes. Our multi-function electrodes are designed for EP and Cath Labs, Cardiac Surgery, Critical-Care Areas and other related departments. They are designed for defibrillation, synchronized cardioversion, external pacing and ECG monitoring. Compatible with biphasic and monophasic defibrillators, our electrodes offer direct connections to a variety of defibrillators, such as Zoll, Medtronic QUICK-COMBO, and Philips. We also offer adapters, allowing multiple brands of defibrillators to use the same electrodes.

TZ Medical Sterile Defibrillation Electrodes are constructed to adhere and conform to the patient’s body, providing superior current distribution, which results in better clinical outcomes. Our multi-function sterile electrodes are ideal for a variety of procedures, including TAVR, AVR, Mini-Maze, ICD Implants, Laser Lead Extraction and much more. They are designed for defibrillation, synchronized cardioversion, external pacing and ECG monitoring. Compatible with biphasic and monophasic defibrillators, our sterile electrodes offer direct connection to Zoll defibrillators. We also offer adapters, allowing multiple brands of defibrillators to use the same electrodes.

The TZ Medical Patient Companion V1 is a multi-port connector with switching capabilities for connection to defibrillators, EP study equipment and RF electrosurgical generators. The box provides a stable, focal location for multiple wires, cables and connections.

The dual-site 7F catheter provides the electrophysiologist with multiple options for the treatment of atrial and ventricular tachyarrhythmias. It allows the physician to position the distal end of the catheter into the coronary sinus (CS) while allowing the proximal electrodes to map the high right atrium (HRA). Subclavian access eliminates the need for an additional femoral stick. The 14 platinum electrode spacing helps facilitate assessment of a line of conduction block.

The TZ Medical EZ Holder is a versatile device that acts as an anchor point to firmly hold catheters and lead wires in place during procedures. This innovative product will help reduce procedure time as well as improve the efficiency of EP cases and implants.

TZ Medical titanium distraction pins for anterior cervical fusions have a self-drilling design that allows for effortless insertion. In addition, TZ Medical's distraction pins have a 10% wider diameter than typical distractions pins for increased durability and complete surgical confidence.

TZ Medical skull pins are a disposable solution to cranial stabilization. The stainless steel skull pins are inserted into the skull clamp to fixate the patient’s head during surgery. The pins are packaged sterile in a pack of three, and come with a protective cap, making them safe and easy to handle.

The PRS™ Lumbar and Cervical Spine Retention System is designed for maintaining maximum sheer loads while supporting, retaining, and/or moving large masses of tissue. It also allows for easy patient positioning during various medical procedures, including lumbar spine and deflecting the shoulders during cervical spine procedures. Load dispersed over a large surface area, accompanied by a latex-free, hypoallergenic adhesive backing provides for a friendly alternative to tapes and adhesives.

The TZ Medical Bayonet Knife is a 145 mm bayonet-style surgical knife used to precisely remove small fragments and pieces of tissue during spine or neurosurgery procedures. The stainless steel blade is extremely sharp and enables precision cutting with minimal distribution of peripheral tissue, while the ergonomic plastic handle is designed to fit comfortably in the operator’s hand. 

StarTrol LED Medical Lighting for examination, procedure and minor surgery is high quality, precision made from durable aluminum and steel, carries an industry leading 10 year limited warranty and is manufactured in the USA. All StarTrol LED Medical Lighting operates at an ideal color rendering and temperature of 94 CRI and 4500K for true tissue rendition.

The TruBrite Adhesive Retractor Light is a sterile, single-use light source that maximizes visualization by directing focused light into surgical cavities eliminating possible shadowing caused by overhead lighting systems. This low-profile device is designed with a flexible LED light that can be adjusted to any desired position for optimal illumination lasting over 2 hours of continuous light output. The self-adhesive backing enables the TruBrite to be firmly mounted to multiple surgical instruments and surfaces.

The TZ Medical Comfort Shield is a leaded shield accessory that supplements the Comfort Cradle arm board. The shield measures 23” x 30”, offering a large area of radiation protection to medical staff during procedures involving fluoroscopy.

The TZ Medical Flipper is a versatile radiation shield designed to keep physicians safe without getting in the way of the procedure. The Flipper may be used on either the right or left side, for femoral groin access, or subclavian access. Convenient adhesive strips on either side of the shield allow it to be secured in place to avoid slipping.

TZ Medical Mobile Barriers are made with Barrier Safe Radiation Protection Glass - a Laminated safety radiation shielding lead glass with 1.6 mm Pb equivalent at 150 kVp - to provide maximum protection. The shatter-resistant glass will not discolor. The mobile barriers are delivered fully assembled.

TZ Medical Radiation Protection Eyewear provide high-quality protection for any case involving scatter radiation. With multiple sizes and styles, our leaded eyewear are available in RX and anti-reflective options.

When it comes to radiation, protecting your brain is a top priority. The TZ Medical SR Headband is a cost effective way to block scatter radiation from reaching one of the most sensitive areas of the body during diagnostic and interventional procedures.

The TZ Medical URPro is a universal system that directly replaces your current MAVIG™ shields with high-quality and long-lasting radiation protection panels. The URPro panels are uniquely designed to match your current MAVIG™ frame system*, allowing you to replace any and/or all damaged panels through a simple installation process.

TZ Medical Anti-Fatigue Mats are designed to provide comfort during extended procedures. The unmatched ergonomic construction reduces discomfort and fatigue caused by standing. Available in multiple sizes, the low-profile, durable edges prevent risk of tripping and allow gurneys and equipment to be rolled over efficiently.

OR Anti-Fatigue Mats are scientifically engineered with conforming gel and supportive foam to provide the ultimate in comfort and support to surgeons, nurses, & technicians. Mats are water-resistant, easy to clean, and provide proper friction level for damp or dry surgical booties.

The TZ Medical Pro11 Headset System enables teams to talk hands-free in the Cath Lab and EP Lab and adjacent rooms. With the Pro11 Headset there are no raised voices or straining to hear, just clear, calm communication between every member of the team, reducing stress and creating a better working environment. The system has full connectivity with external broadcast and audiovisual streaming facilities, enabling the physician to participate real-time in remote broadcasts and seminars. Using high-quality DECT frequencies, multiple systems can be used in the same premises without interference.

The RadStop Station is a lightweight poly-carbonate board designed to hold the Comfort Shield to help protect operators and staff from radiation produced during imaging procedures. The shape and construction of the board is designed to be easily moved under the patient into nearly any configuration to extend radiation protection in ways that fixed position devices can’t achieve. The RadStop Station can be used for all diagnostic and interventional imaging and can help speed up these procedures as well as prevent contamination of equipment.